Troubleshooting
Dear Client,
Thank you for buying this STEBA product. The following table will help you with pro-
blems that may occur when using your device. For many problems there is a simple
solution, because not everything that appears like a malfunction must be serious.
Please check the following list before contacting our customer service.
Problem
Device does not
work
Air flow rate is
low
Noises
Air is not filtered ∙ Fine dust sensor is soiled
Odours
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the envi-
ronment or human health from uncontrolled waste disposal, recycle it re-
sponsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental safe
recycling.
Packaging disposal: Do not throw away the package materials. Please put it in the
recycling bin.
Gift box: Paper, should be put to the old paper collection point.
Plastic packaging material and foils should be collected in the spe-
cial collection containers.
Service and Repair:
If the appliance must be repaired, please get in touch with your trader or with the
manufacturer:
Service-Tel.: 09543 / 449-44, Fax: 09543 / 449-19
e-Mail: elektro@steba.com Internet: http://www.steba.com
Reason
∙ Device is not plugged in
∙ Device is not turned on
∙ Filter must be cleaned or
replaced
∙ Air intake is blocked
∙ Obstacles in the ventilation
area
∙ Uneven surface
∙ Filter is soiled
STEBA Elektrogeräte GmbH & Co KG
Pointstr. 2, 96129 Strullendorf / Germany
Distribution-Tel.: 09543 / 449-17 / -18,
Solution
∙ Check fuse
∙ Plug it in
∙ Clean or replace filter
∙ Free air intake from dirt or
obstacles
∙ Remove obstacles
∙ Place device on even surface
∙ Clean the sensor
∙ Clean or replace filter
15