Setup
Items not listed under
1. Use the included Euroblock connectors to connect the inputs on the rear panel to your
audio sources.
• Each channel input has a ground (G), cold/negative (–), and hot/positive (+) connector.
2. Use the included Euroblock connectors to connect the outputs on the rear panel to your
loudspeakers.
3. Use the included power cable to connect the power inlet to a power outlet.
4. Power on all of your audio sources (Blu-ray
etc.).
5. Press the power switch to power on DN-474A.
6. Adjust the level knobs for each channel input as necessary.
Example
Receiver
SOURCE SELECT
ZONE 2
ZONE 2
ZONE 3
ZONE 3
INFO
OPTION
ON/OFF
SOURCE
ON/OFF
SOURCE
STATUS
DIMMER
1 CBL/SAT
ENTER
VIDEO
PHONES
BACK
SETUP
AUX 1
HDMI 7
5V/1A
Introduction
MASTER VOLUME
QUICK SELECT
2 Blu-ray
3 GAME 4 NETWORK
L - AUDIO - R
SETUP MIC
AUX 1
IN-Command
S
E
R
I
E
S
INTEGRATED NETWORK AV RECEIVER
AVR-X4000
Blu-ray Player
Box Contents
are sold separately.
®
players, stereos, microphones, amplifiers,
Loudspeakers
Loudspeakers
Power
5