ETNA KGG860ZTA Mode D'emploi page 12

OPERATION
Use
incorrect
correct
3
4
EN 4
Burners with electric ignition:
• Press the control knob and turn it anticlockwise. The burner ignites.
• Keep the control knob fully pressed for at least 3 seconds between
high and low settings.
The thermocouple safeguard is activated.
Pans
• Ensure that the flames always remain underneath the pan.
If flames play around the pan, a great deal of energy is wasted.
The handles can also become too hot.
• Do not use pans with a base diameter smaller than 12 cm.
Smaller pans are not stable.
The recommended pan base diameters are:
• rapid burner
• standard burner
• simmer burner
• wok burner
Pan support
Put the pan supports down vertically without sliding them over
the glass top.
Burners
Put the parts of the burner in the correct order so they fit
1
together properly.
1. Burner cover
2
2. Burner distributor
3. Thermocouple
4. Spark plug
5
5. Burner housing
at least 22 cm
at least 18 cm
at least 14 cm
at least 24 cm