Maximum Distance; How To Pair Two Midland Btnext Pro Units - Midland BTNEXT PRO Guide D'utilisation

Maximum Distance

You can reach 1.6 Km intercom distance if you are in line of sight without obstructions
and interferences (the riders must be always in sight).

How to pair two Midland BTNEXT PRO units

The two units supplied in the same Midland BTNEXT PRO box, are already paired and
ready to use, this means you don't need to perform this procedure. The units are already
paired using the Middle button. If the devices are not part of the same kit, or the units
has been purchased separately, you need to first pair them in order to use them.
To pair the Midland BTNEXT PRO to another Midland BTNEXT PRO unit
To pair the Midland BTNEXT PRO to another Midland BTNEXT PRO unit, you must
first enter the setup mode:
1. Turn off the unit
2. Press and hold down the middle button about 7 sec., until the Red light is on per-
manently.
3. Now press the Middle button for 3 seconds. The Blue and Red lights will flash.
4. Do the same procedure on the other unit. When successfully paired, each unit will
have the Blue light on for one second and then go back to the setup mode (Red light
always on).
5. Now the pairing procedure is complete, you just need to exit the setup mode before
you can use the units.
6. Double click on the Middle button, the Red light will turn off and the Blue light will
start flashing.
You can use now your Midland BTNEXT PRO
Here is an example of the buttons main functionality based on the mode you are on.
Mode Forward (Left button)
Intercom Open/close the intercom to the first rider
Redial last number/accept or reject incoming call
Phone on "Vol+"
Phone (while music play) Forward the song
FM Radio Scan up
24
Attention: remember to switch off all the other Bluetooth device that are not part of the
pairing procedure, only the two devices involved in the pairing must be turned on.
How to use the Intercom with two units
To use the intercom feature, be sure that both units are turned on and correctly paired
together.
Manual activation
When in "Intercom Mode" press the Middle button on one of the two units in "Inter-
com" mode. Communication is enabled and remains active until you press again the
middle button. The intercom need some seconds to activate, you will hear a beep tone
when the intercom is open.
Voice activation (VOX)
Simply say something, after some seconds the communication will be opened and will
remain active for the time you are talking. If there is no conversation the intercom will be
closed after 40 seconds. If needed you can close the intercom manually without waiting
40 seconds (just press the middle button).
If needed, you can disable the VOX feature simply by pressing the Backward button for
7 sec. A voice announcement will advise you when the VOX is disabled. To turn the VOX
on again, just press the same button and a voice announcement will advise you that the
VOX is now active. This setting is remembered also if you turn off the unit.
Attention: The Voice activation (VOX) can open the intercom communication only to
the unit that was paired with the Middle button. If you choose to use a different button
(Forward or Backward ), you will be able to active the intercom only manually.
Middle button
Open/close the intercom to the second rider Open/close the intercom to the Third rider
Play/pause
FM Radio On/off
Rear (Right button)
Redial last number/accept or reject incoming call
on "Vol-"
Backward the song
Scan down
www.midlandeurope.com