Publicité
Les langues disponibles
Les langues disponibles
Preparation/information for assembly and use
Transport and storage
The product is delivered stacked on pallets.
After unpacking and checking, handle the parts as follows:
Protect the wood against
long-term, direct sunlight
Incorrect storage may result in:
Wood is a natural product. Varied colouring, knurls and crack formation are normal and have no influence on
the statics.
Dry cracks may form as a result of extreme weather conditions, especially after long hot periods.
These dry cracks are in no way a defect in quality but are a part of the natural appearance of the wood.
Depending on the weather these cracks may close up again to a minimum.
Moreover, these dry cracks, which form longitudinally in the wood, have no effect on the strength and
resilience of the material.
Packaging
Please do not simply throw away the packaging material.
Paper, card and corrugated board as well as plastic packaging materials should be placed in the correct
collection containers.
The pallet on which the cabin is transported comprises two floor beams which are required for the
assembly of the cabin and two distance timbers which are only packaging material and can be disposed of.
Techn. Änderungen vorbehalten!
moisture
- Cracks
- Distortion and warping
- Rotting (infestation by pests etc.)
Store the wood such that it is protected against weathering
and has sufficient ventilation.
Copyright weka-Holzbau GmbH, Neubrandenburg
8
contact with the ground
Publicité
