Whispbar K671W Instructions De Montage page 8

EN
Fitting Kit
K671W
Select plastic internal block (from fitting kit)
and insert into foot.
Repeat for all legs.
Fitment
There are 4 concealed mounting points
hidden by the vehicles rubber insert on the
roof.
Measure from the front of the rubber insert
and make a mark at 355mm and 1245mm.
From these 2 marks measure 25mm
forward and 25mm back and mark a line
across the rubber insert.
Carefully lift the rubber insert by hand to
reveal the mounting points as shown, only
lift the minimum amount required to reveal
the mounting point.
Note: Do not use sharp objects or tools to
lift the rubber moulding.
Note: Take care when lifting the rubber
insert not to kink or bend it.
Note: The mounting points are covered
with sealant.
8