Accessories - Flex FX2141 Manuel De L'utilisateur

WARNING
battery pack from the tool when cleaning or
performing any maintenance.
SERVICE
WARNING
personnel may result in misplacing of
internal wires and components which could
cause a serious hazard. We recommend that
all tool service be performed by a FLEX Factory
Service Center or Authorized FLEX Service
Station.
GENERAL MAINTENANCE
WARNING
parts. Use of any other parts could create a
hazard or cause product damage. Periodically
inspect the entire product for damaged, missing,
or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or
damaged parts are replaced. Please contact
customer service or an authorized service
center for assistance.
CLEANING
WARNING
compressed dry air. Always wear safety
WARNING
Blade wrench
Blade
MAINTENANCE
To avoid serious personal
injury, always remove the
Preventive maintenance
performed by unauthorized
When servicing, use only
identical replacement
The tool may be cleaned
most effectively with

ACCESSORIES

The use of any other accessories not specified in this manual may create a
hazard.
goggles when cleaning tools with
compressed air. Ventilation openings and
switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by
inserting pointed objects through openings.
WARNING
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
CARE OF BLADES
Blades become dull even from cutting regular
lumber. If you find yourself forcing the saw
forward to cut instead of just guiding it through
the cut, chances are the blade is dull or coated
with wood pitch.
When cleaning gum and wood pitch from blade,
detach the battery pack and remove the blade.
Remember, blades are designed to cut, so
handle them carefully. Wear gloves and wipe the
blade with kerosene or similar solvent to remove
the gum and pitch.
Unless you are experienced in sharpening
blades, we recommend you do not try.
-21-
Certain cleaning agents
and solvents damage
STORAGE