Tp - Pause Time - BIRDSTOP BS-15 Mode D'emploi

4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
– Pause time
tP
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
2. Press the SEL button repeatedly until the
display.
3. Press the SET button to set the PAUSE TIME. Press the "+" button to
increase the pause time or the "–" button to decrease the pause time.
The factory-set pause time is 1 minute. (
the time expressed in tens of seconds) - Es.
( - - - ... indicate the time expressed in minutes). The pause time
1 2 3 4
can be varied as needed from CONTINUOUS to a maximum of 30 mi-
nutes
4. To set the CONTINUOUS function, press the
symbol appears on the display.
symbol appears on the
tP
- - - -
01 02 03 04 05
indicate 40 sec.
04
button until the
(exit)
EH
indicate
Co
39