Installation; Switching On/Off - BIRDSTOP BS-15 Mode D'emploi

- Horn mod. HP - AL-06: directional horn with neodymium magnet
with power up to 50 watts, suitable for agricultural use to protect
extensive areas of land. This horn allows you to interchange the
repellers. The small cone allows you to emit the sound in such a way
as to cover a circular area. The large directional cone allows you to
emit the sound a great distance.
- 10m long extension cable for speakers.

Installation

Use the eyebolt rod provided to position the BS-15 in a location that is
easily accessible and protected from the elements. Do not install it at
ground level to prevent it from being stood on or crushed.
BS-15 is a non-waterproof device; install the guard provided so that it
is protected from coming into contact with water. If this is not possible
due to installation requirements, make sure to protect the device with
other appropriate means.

Switching On/Off

Connect the terminals with the correct polarity (Red= + Positive, Black
= - Negative) before connecting the BS-15 to a 12V external battery,
not supplied. Then connect the other end of the cable to the female
connector of the device.
For the BS-15 A model, connect the 12V battery to the device socket
and connect to the power supply.
The BS-15 will start working when it is connected to the power source.
To turn it off, simply disconnect the terminals from the battery or
disconnect the plug from the power outlet.
34