Mono Operation - Kicker CX300.1 Manuel D'utilisation

Install a fuse within 18" (45cm) of the battery and in-line with the power cable connected to your amplifi er. If you
ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the last
wire disconnected from the amplifi er--just the opposite as when you installed it.
Model External Fuse
(sold separately)
CX300.1 1 x 40 Ampere
CX600.1 1 x 80 Ampere
CX1200.1 1 x 150 Ampere

MONO OPERATION

minimum impedance of 2 ohms
24"
(60cm)
bare-metal
chassis ground
4
2012 CX Mono Amps Rev I.indd 4 2012 CX Mono Amps Rev I.indd 4
Power/Ground Wire
8 Gauge
4 Gauge
4 Gauge
woofer
GND REM +12V
external fuse
remote turn-on
(see page 5)
KICKER Wiring Kit
PK8, ZCK84
PK4, CK44, ZCK44
PK4, CK44, ZCK44
18"
(45cm)
12V
battery
bare-metal
chassis ground
6/22/2012 2:32:29 PM 6/22/2012 2:32:29 PM