Daily Cleaning - ARDES AR5R11 Instructions D'emploi

IONIZER button (F):
• When unit is operating press ionizer button one time to activate ionizer
function; the related indicator light (7) will turn on in the control panel.
• To deactivate ionizer function, press again this button.
Maintenance
GB
Before carrying out routine cleaning, switch off the fan and disconnect
mains power. For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.

DAILY CLEANING

To reduce bacteria and scale residues, empty the water tank every day
after use and dry it with a soft and clean cloth.
Cleaning the anti-dust filter:
push the clip placed on the top part of anti-dust filter and remove it from
the appliance by pulling it out. Clean it with water and replace on the
appliance when dry. Fix the anti-dust filter on its position.
Cleaning the cooling pad:
Remove anti-dust filter as mention above and then the cooling pad.
Clean the cooling pad under the water and put it inside the unit.
Attention: the cooling pad and the anti-dust filter must be replaced in the
appliance before turn it on.
Cleaning of the water tank:
Pull out the water tank (Attention: the water tank cannot be opened
completely) and clean it with a soft damp cloth. If the water tank is
particularly dirty use a mild soap that must be rinsed carefully.
On the bottom of the water tank there is a small plastic stopper that
can be removed. To completely empty the water tank place a container
underneath the plastic stopper and gently remove the plastic stopper so
that the water can drain out.
Attention: before store the fan at the end of the season is necessary
completely empty the water tank and dry it. Clean even the anti-dust filter
and cooling pad and make sure they are completely dry before replace
them in the unit.
21