ARDES AR5R11 Instructions D'emploi page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Batteries
Remote control is supplied with battery inside (CR2025 type); remove
the plastic sheet from the battery cover before use remote control. When
the battery is over, it must be replaced with the same type following the
drawing on the back of remote control.
ON/OFF Button (A):
• Press On/Off button one time to activate the fan. The unit will show the
ambient temperature in °C and will start to operate at minimum speed
(indicator light 2 will be on in the control panel).
• Press On/Off button when unit is on to turn it off.
SPEED Button (B):
• Press Speed button when unit is on to select the desired air speed:
minimum (indicator light 2), medium (indicator light 3) or maximum
(indicator light 4).
TIMER Button (C):
• When the unit is operating, you can set the timer to switch the fan
off automatically after the set time. Press Timer button repeatedly to
select the desired time period in one hour increment from 1 hours to 12
hours. The hours of setted timer are indicated on the display (indicator
light 8). If the timer function is activated, the indicator light 9 will be on
in the control panel. To deactivate timer function press this button till
the indicator light 8 will show 00 or turn the fan off manually.
SWING Button (D):
• Press swing button when the unit is operating to activate the automatic
left/right oscillation of vertical louvres. The "Swing" indicator light
(5) will illuminate on the control panel. Press again swing button to
deactivate the automatic swing.
COOLER Button (E):
• When unit is operating press cooler button one time to activate the
evaporative cooling function. If this function is activated, the indicator
light 6 will turn on in the control panel.
• This function use water so make sure about water level in the water
tank before turn on this function.
• The ice boxes provided increase the cool effect: before use, fill them
with water and put in the refrigerator until they are completely frozen.
After that insert the frozen ice boxes in the water tank making sure that
water level is under maximum level allowed.
• To deactivate this function press again cooler button. If the evaporative
cooling function is deactivated the unit work as a fan.
20

Publicité

Table des Matières
loading

Table des Matières