Saitek M80X Guide D'utilisation page 2

PM45n_manual.qxd 14/08/2008
SAITEK M80X WIRELESS NOTEBOOK MOUSE
System Compatibility
PC running Windows XP/XP64/Vista/Mac OS X
Installation
1
Unclip the battery cover. Slide the cover back to
expose the battery
compartment.
4
Insert the nano wireless Insert the batteries in
receiver in one of your the compartment in the
PC's USB ports. With direction shown and
your PC switched on, replace the cover.
follow the device
installation wizard to
complete the installation
of the new USB device.
14:34 Page 2
2
3
Unclip the nano wireless
receiver.
5
Powering the mouse on/off
The mouse will automatically switch itself on when you insert new batteries. To
save battery power when not using the mouse, press the power button on the
underside and hold for for 3~5 seconds.To restart the mouse press the button
once.
The mouse LED flashes blue to indicate the batteries are running down. When
this happens replace the batteries.
Troubleshooting
If the mouse does not work:
1 Check the batteries have not expired and are inserted properly.
2 Make sure the mouse is switched on by pressing the button on the
underside.
3 Check the nano receiver is properly inserted in one of your PC's USB ports.
4 Insert the nano receiver in another of your PC's USB ports.
Important Information
Some experts believe that using any mouse or trackball may cause serious
injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or
weakness in these areas, please consult a qualified health professional
immediately.
To reduce the risk of injury, please follow these precautions:
• Take frequent breaks, get up and walk around several times every hour.
• Vary your tasks throughout the day.
• Keep your shoulders relaxed with your elbows at your side. Position your
keyboard and mouse so you do not have to reach.
• Adjust your chair and keyboard so your upper arms and wrists are straight.
• Avoid resting your wrists on sharp edges.
Technical Support
Can't get started - don't worry, we're here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they
have just not been installed properly.
If you experience any difficulty with this product, please first visit our website
www.saitek.com. The technical support area will provide you with all the
information you need to get the most out of your product and should solve any
problems you might have.