Yamaha YDS-11 Mode D'emploi page 7

Connecting the dock cable
1. Connect one of the plugs of the dock
cable to the dock cable terminal of
this unit firmly.
2. Make sure the power of the universal
dock compatible component is turned
off.
Note
Connecting the dock connection cable while the
dock-compatible device's power is on could
result in damage.
Connect the plug
with the side with
the release button
facing upward.
3. Connect the other plug of the dock
cable to the DOCK terminal of the
universal dock compatible
component.
Note
Be sure to connect the plugs of the dock cable
firmly to both the dock cable terminal of this unit
and the DOCK terminal of the universal dock
compatible component. When the connection is
loose, this unit may output some unwanted noise.
DOCK
3
En