Franke FCR 935 BK/XS I Manuel D'utilisation page 10

4. CONTROLS
Button Function
T1 Turns the Motor off.
T2 Turns the motor on at speed one.
T3
Turns the Motor on at speed two.
Keeping the button pressed for approximately 2 seconds
activates the Delay function.
Activates automatic switch-off (Motor+Lights) with a 30' delay.
Can be activated from any position with the Intensive function
disabled.
It is disabled by pressing button T3 or button T1 for
approximately 2 seconds.
T4
Turns the Motor on at speed three.
Turns the motor on with Intensive function enabled.
This speed is timed to run for 6 minutes. At the end of this
time, the system returns automatically to the speed that was
set before.
It cannot be activated when the Delay function is active.
It is disabled by pressing button T4 or button T1 for
approximately 2 seconds.
L Turns the Lighting System on and off at maximum intensity.
5. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
10
T1 T2 T3 T4 L
Led
-
Buttons T1+T2 are on.
Buttons T1+T3 are on.
Function ON: the respective
buttons T1+ (T2 or T3 or T4)
flash once every second.
Buttons T1+T4 are on.
Button T4 flashes once every
second and button T1 stays lit.
Button on.