Installation Sequence; Overheating Protection - Starmix BFS 12 Notice D'utilisation

1 Instructions
We have compiled these operating instructions so that you become
familiar with your new appliance quickly and comprehensively.
The manufacturer reserves the right to carry out modifications to
the design and equipment.
Any other work not covered by this operating manual must not be
carried out.
THIS MACHINE IS PERFECT FOR VARIOUS USES, FOR EXAM-
PLE IN HOTELS, SCHOOLS, HOSPITALS, FACTORIES, SHOPS
AND LIVING QUARTERS.
2 Before use
▶ Please read these instructions carefully before using this appli-
ance. It provides you with important information on its safety,
operation, maintenance and disposal.
▶ Familiarise yourself with your new appliance and its various
▶ functions following the sequence of the instructions.
▶ Follow all notes and explanations referring to the correct opera-
tion and handling. This will ensure the continuous availability
and a long life for your appliance.
▶ The safety notes, in particular, must be followed. They help
you to prevent accidents and to protect your appliance from
damage..
▶ Please keep these instructions for future reference.
3 Instructions for the wall brackets
To be fitted by a qualified expert taking due consideration of
existing national safety regulations. In rooms containing showers
or baths, the wall bracket may not be fitted within the safety zone
stipulated in regulation 0100 part 701. The wall bracket should be
fitted at a height of at least 150 cm above the floor.. (→
)
distances

3.1 Installation sequence;

for fixed connection lead (A)
The connection wiring from the mains must be at least 2x1,0
mm for wall holder models WH.
2
6. Break the cable lead through ① in the rear wall of the wall
bracket.
7. Pull the cable wires ② coming out of the wall through the open
lead through ①.
8. Secure the back plate of the wall holder to the wall using the
plugs and screws provided.
9. Fix the cable wires ② in the terminal ③ as illustrated. To do so,
remove the terminal ③ and then put it back again.
Minimum
Original operating instructions in German
10. After testing the hair dryer, place the wall bracket housing in this
position and fasten with the housing screw ④.
3.2 Installation sequence
for mobile connection lead (B)
WH: The connection wiring must be at least type H05VV-F
2x1,0 mm
2
7. Break the membrane ⑤ in the lower edge of the rear wall to
take the second anti-kink bush ⑥.
8. Secure the back plate of the wall holder to the wall using the
plugs and screws provided.
9. Pull the anti-kink bush ⑥ over the mobile connection lead ⑦.
10. Mount the connection lead ⑦ to the terminal ③ as illustrated.
To do so, remove the terminal ③ and then put it back again.
11. Place the anti-kink bush ⑥ in the provided seat and mount the
lead ⑦ as illustrated with strain relief ⑧ using two screws.
12. After testing the hair dryer, place the wall bracket housing in its
position and fasten with the housing screw ④.

3.3 Overheating protection

The appliance switches off automatically in the case of thermal
overload. When this happens, switch the switch to 0 or release
the push button and eliminate the external causes of overheating.
Once the appliance has cooled down it will be ready to use again in
a few minutes. Defect hair dryers may only be repaired by qualified
experts.
4 MAINTENANCE
5. Regularly control the feeding cable looking for damages, cracks
or ageing. Substitute the cable before using it further.
6. If the feeding cable is damaged it must be substituted by the
manufacturer or by its after sales service or in any case by a
similarly qualified person, thus preventing any possible risk.
7. When using extension electric wires ensure that they are lying
on dry surfaces and protected against possible water jets.
8. Specialized personnel must always carry out maintenance and
repairs; any damaged part must be substituted with original
spare parts.
ATTENTION: it is forbidden to carry out changes to the apparatus.
Tampering could cause fires and damages even lethal to the user
and the forfeiture of the guarantee.
The manufacturer declines any responsibility for damages caused
to people or things due to non-compliance with these instructions or
if the apparatus is unreasonably used.
GB - 13