Unpacking, Assembling And Setting Up The Appliance; Risk Of Electric Shock; Important - KLARBACH VS 34569 we Instructions D'utilisation Et D'installation

the manufacturer, in his after-
sales service workshop or by a
person with the necessary
qualifications in the event of
damage.
10 Unpacking, assembling
and setting up the
appliance
✓ Take care when opening the
packaging.
✓ Remove the fan from the
packaging.
✓ Check whether the delivery is
complete (see Fig 1).
✓ Check the fan and all the
individual parts for damage.
If the appliance is damaged, please
contact After Sales Service
www.ggv-service.de
Open the packaging carefully
without the use of sharp knives or
other pointed objects in order not to
damage the fan.
Assembling the appliance
RISK OF ELECTRIC
SHOCK!
Do not connect the fan to the mains
power supply during installation.
RISK OF INJURY!
Never operate the appliance without
the protective grilles. The protective
grilles must be tightly fastened
together at all times during
operation.

IMPORTANT

Observe the sequence of steps
described to ensure proper
installation.
1. Put together the two base
elements (2 and 3).
2. Pass the mains power cable (1)
through the opening in the base
element.
3. Turn the fan upside down.
4. Plug on the base element.
5. Tighten the four screws.
6. Turn fan over.
Setting up the appliance
• Set up the appliance at a
distance of at least 50 cm from
other objects (curtains, walls,
spray cans).
• Place the appliance on a firm,
level surface.
Electrical connection
RISK OF ELECTRIC
SHOCK!
A faulty electrical installation or
excessively high mains voltages can
result in electric shocks!
• Connect the fan to a properly
installed plug socket with
earthing contact only when the
mains voltage of the plug socket
EN
Page | 21