Menu Operations - JVC KD-X50BT Manuel D'instructions

Menu operations

1
(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
2
Menu item
DEMO
CLOCK SET
CLOCK ADJ *1
(Clock
adjustment)
COLOR
COLOR SETUP
DIMMER SET
BRIGHTNESS
SCROLL *3
TAG DISPLAY
PRO EQ
FADER *4*5
BALANCE *5
LOUD
(Loudness)
*1 Takes effect only when clock data is received.
*2 The illumination control lead connection is required. (See "Installation/Connection Manual".)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*4 If you are using a two-speaker system, set the fader level to "00".
*5 This adjustment will not affect the subwoofer output.
Selectable setting (Initial: [XX])
For settings, page 4.
For settings, page 4.
[AUTO]: The built-in clock is synchronized with the clock data received
from the FM Radio Broadcast Data System station.
OFF: Cancels.
For settings, page 19.
Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *2
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
DAY[31]/NIGHT[15]: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
[ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
[ON]: Shows the TAG information while playing MP3/WMA/WAV tracks.
OFF: Cancels.
For settings, page 20.
R06 — F06 [00]: Adjusts the front and rear speaker output balance.
L06 — R06 [00]: Adjusts the left and right speaker output balance.
ON: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]: Cancels.
3 Repeat step 2 if necessary.
To return to the previous menu, press
To exit from the menu, press DISP or MENU.
Menu operations
.
ENGLISH | 21