Important Safety Warning - Kicker L7T ENCLOSURES TL7T8 Manuel D'utilisation

IMPORTANT SAFETY WARNING

To avoid potential injury or possible death from forward movement of the enclosure during abrupt stops or
accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are solely
responsible for securely fastening the enclosure in your vehicle. Make sure the mounting screws will not
puncture the gas tank/brake lines/wiring or interfere with any mechanical parts on the underside of the
mounting surface.
PERFORMANCE
Model:
Rated Impedance [Ω]
Sensitivity [1W, 1m]
Continuous Power Handling [Watts RMS]
Frequency Response [Hz]
Enclosure Depth 1 [in, cm]
Enclosure Depth 2 [in, cm]
Enclosure Height [in, cm]
Enclosure Width [in, cm]
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER
Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
The use of a subsonic fi lter will signifi cantly increase power handling. The power handling specifi cation in this chart is
calculated using a 25Hz, 24dB/octave subsonic fi lter.
Mount the brackets to the bottom of the
enclosure using the supplied smaller
screws. Securely attach the enclosure to the
vehicle with the supplied larger screws.
TL7T8
2 or 4
83.1dB
350
30–100
3-5/8, 9.2
6-1/4, 16
11-1/4, 28.5
19-5/8, 50
Subwoofer grills sold separately
at your local KICKER dealer
TL7T10
2 or 4
84.1dB
500
25–100
4-3/8, 11.3
7-1/4, 18.5
12, 30.4
20-1/4, 51.5
TL7T12
2 or 4
86.1dB
600
25–100
4-3/8, 11.2
7-3/4, 19.6
13-3/4, 35
21-1/2, 54.6
3