Important Safety Warning - Kicker SOLO-BARIC L7 Manuel D'utilisation

Masquer les pouces Voir aussi pour SOLO-BARIC L7:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY WARNING

To avoid potential injury or possible death from forward movement of the enclousre during abrupt stops or
accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are soley
responsible for securely fastening the enclosure in your vehicle.
PERFORMANCE
Model:
Nominal Impedance [Zn], ohm [per coil]
Sensitivity [SPLo], dB @ 1W, 1m
Power Handling Watts, Peak (RMS)
Enclosure Top Surface Depth, in (cm)
Enclosure Bottom Surface Depth, in (cm)
Enclosure Height, in (cm)
Enclosure Width, in (cm)
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine
KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum
performance.
Mount the brackets to the bottom of the
enclosure using the supplied smaller
screws. Securely attach the enclosure to the
vehicle with the supplied larger screws.
DS12L7
VS12L7
2
2
89.9
86.9
3000 (1500)
1500 (750)
16 3/8 (41.5)
14 11/16 (37.2)
19 9/16 (49.7)
18 (45.7)
16 (40.6)
16 (40.6)
32 3/8 (82.2)
18 3/4 (47.5)
Subwoofer grills sold separately
at your local KICKER dealer
TS10L7
2
85.87
1200 (600)
6 11/16 (16.9)
10 (25.4)
15 (38.1)
21 1/2 (54.6)
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Solo-baric ds12l7Solo-baric vs12l7Solo-baric ts10l7

Table des Matières