Cancel the last action. Within a function (area, volume, etc.) single measurement can be
deleted step by step and re-measured.
Press this key for 2 seconds to switch the illumination on or off.
Default reference setting is the rear of the device.
Press this key to change the reference. The reference returns automatically to the default
setting (rear reference) after power off.
Press this key to activate the laser.
Press again to implement the distance measurement.
Press the key briefly to activate the laser, press and hold key for about 2 seconds to start
continuous measuring. Press again shortly: continuous measurement is stopped.
During continuous measuring, the latest measured value is displayed on the main display area, auxi-
liary display area shows the minimum and maximum measured value.
Single distance, area, volume measurement can all be realized by using addition/subtraction to accu-
mulate or regressive. Press
will appear in the front of the main display. After selecting the algorithm, in the distance measurement
mode, the instrument will automatically operate after the completion of measurement, the result is
displayed in the main display area, measured value will be displayed in the auxiliary display area. In
the area, volume mode, After the completion of area or volume measurement, press
calculation, the result is displayed in the main display area, latest measured value will be displayed in
the auxiliary display area.
Press this key once. This symbol
measurement. Press
the main display area.
www.romusworld.com
Clear-Key
Illumination
Reference Setting
Measuring
Single Measurement
Continuous Measurement
Function
Addition / Subtraction
or
to switch to addition or subtraction. Operational symbol
Area
is displayed. Press key
again and take the second line measurement. The result is displayed in
LASER MÈTRE RLM-60
LASER DISTANCE METRE RLM-60
to take the first line
www.romus.org
RÉF. 93256
key to
10