Kyocera Mita PF-8E Manuel D'utilisation page 14

Load up to 2,000 sheets of paper (four standard reams of
6.
packages of paper with a thickness of 0.1 mm) onto the tray.
Fan and flex each ream as you load it. Load the paper with the
side on which printing is done facing upward in the feeder.
Close the cover. The tray will rise and a sheet will feed
7.
partially into the printer. The printer indicates Ready and the
feeder is ready for operation.
12
pf8-Eng.pm6
Don't put in more paper than the load limit
indicated on the inside of the feeder. See figure
below.
12
Adjuster Knob
Load Limit
12/19/00, 8:22 PM