Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CAUTION : Do not use excessive force to clamp the disc. It could crack it and
cause failure during use.
!
Do not immerse the disc into any type of lubricant including water.
This angle grinder is designed as a dry grinder/cutter. Failure to
observe this warning could result in a fatal shock.
WARNING
c. Auxiliary handle (Fig. 3)
Fig. 3
d. Rotating the rear handle (Fig. 4)
Fig. 4
•
The auxiliary handle can be
assembled in three different positions
around the casing to meet the
operator's different needs.
•
To assemble the handle, simply screw
it into one of the attachment points.
Check that the handle has been
securely fastened, but don't screw it
in too tightly.
•
The rear handle can be rotated to the
left or right. It must be "locked" into
one of the three preset positions:
central, 90° to the left or 90° to the
right. It must not be used at any
position in between these three
preset positions as it might rotate
during use and create a hazard.
•
Press the rotating handle release
button and turn the rear handle to suit
the planned operation.
CAUTION : Always ensure that the
•
angle grinder is switched off before
making any adjustments.
Publicité
Table des Matières
