Ayce IC2100AG Traduction De La Notice Originale page 82

OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. They should fit with the machine and your
purpose.
2. Functions
a. Fitting the guard (Fig. 1)
!
Switch off the grinder and disconnect it from the power supply.
Depending on whether your operation is cutting or grinding, select the
correct disc guard.
WARNING
Fig. 1
This tool is supplied with both grinding
and cutting guards. Please take time to
refer to the diagrams in this manual to
ensure you are using the correct guard
for the task. Failure to use the grinding
guard for cutting operations could result
in injury. This guard has been specifically
designed to offer extra protection in the
rare event of disc or work-piece failure.
Use of the grinding guard offers extra
versatility in confined spaces but must
only be used for grinding.
1. Open the cam lock mechanism of the
disc guard. Position the guard on the
tool.
2. Twist the guard to the appropriate
position, where it will deflect hot
sparks away from the operator.
3. Lock the guard in position with the
cam lock.
4. You can use the spanner to adjust the
bolt which is on the cam lock for a
better tighten.