Setting The Key Volume; Setting The Signal Tone Volume; Automatic Clean Lock; Automatic Door Opening - Thermador T36IB902SP Guide D'utilisation Et D'entretien

Setting the key volume

You can adjust the volume level of the sounds
generated when pressing keys.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button to open the menu item.
3.
Use ) button to move to the menu item Key
4.
volume.
Press : button to open the menu item.
5.
Use ( ) buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Setting the signal tone volume

You can adjust the volume level of the signal tones
generated e.g. with alarms.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button to open the menu item.
3.
Use ) button to move to the menu item Signal
4.
tone volume.
Press : button to open the menu item.
5.
Use ( ) buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Automatic clean lock

You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ) button to move to the menu
4.
item Automatic clean lock.
To change the setting, press : button.
5.

Automatic door opening

The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the
door.
Operating the appliance en-us
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to fail or wear out.
Do not close the door as long as automatic
door opening is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door opening
will re-adjust itself.
Open menu item Auto door opening of refrigerator
compartment:
Press " button to open the Settings menu.
1.
Press ( button to move to the Appliance settings
2.
menu.
Press 8 button to open the menu.
3.
Press ) button to move the menu item Auto door
4.
.
opening
j
To change the setting, press : button.
5.
Open menu item Auto door opening of freezer
compartment:
Press " button to open the Settings menu.
1.
Press ( button to move to the Appliance settings
2.
menu.
Press 8 button to open the menu.
3.
Press ) button to move the menu item Auto door
4.
.
opening
k
To change the setting, press : button.
5.
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
Note: Please note that automatic door opening is
disabled if Sabbath mode is activated.
Open menu item Auto door opening of
1.
refrigerator compartment or freezer compartment.
Select menu item Push-to-open system.
2.
Press 8 button to open the menu item.
3.
Select Opening force.Here you can select the
4.
level of force required to activate automatic door
opening.
Select Opening duration.Here you can select
5.
how long the door should remain open a crack
before it closes again automatically.
If the door only remains open a crack, the
Note:
appliance checks once a second whether the door
is still ajar.After the selected opening duration
elapses, the appliance will close the door
automatically.
15