Customer Satisfaction - Homak BK04056054 Mode D'emploi

Table des Matières

Les langues disponibles

MAINTENANCE

Ball-Bearing Slides

Note: Unload drawer prior to drawer removal.

Never overload drawers.

To remove drawers and slides, pull drawer all the way out, depress the

black drawer release levers on each slide. For ball-bearing glides, there

is one black lever per slide. One black lever will be pushed down and the

other will be pushed up for drawer removal. After levers are pushed, the

drawer is released. Pull out drawer all the way for removal.

To re-install the drawer, insert guides on drawer side into slides and

firmly close drawer all the way.

LEFT DRAWER RELEASE

LEVIER DE TIROIR GAUCHE

PALANCA DEL CAJÓN IZQUIERDO

To maintain the smooth and quiet operation of the ball-bearing slides,

lubricate the extension track that houses the ball bearings every 3-6

months with a high quality jelly-like petroleum based lubricant.

Powder Coat Finish

For heavy build-up of dirt and grime, our powder coat paint finish can be

cleaned with spray wax. Lightly spray the wax on the surface, and gently

wipe with a soft, dry microfiber cloth.

Window cleaner and a soft cloth dampened with water can be used to

clean the finish on a regular basis.