Customer Satisfaction - Homak RS PRO Série Mode D'emploi

MAINTENANCE
Ball-Bearing Slides
Note: Unload drawer prior to drawer removal.
Never overload drawers.
To remove drawers and slides, pull drawer all the way out, depress the
black drawer release levers on each slide. For ball-bearing glides, there
is one black lever per slide. One black lever will be pushed down and the
other will be pushed up for drawer removal. After levers are pushed, the
drawer is released. Pull out drawer all the way for removal.
To re-install the drawer, insert guides on drawer side into slides and firmly
close drawer all the way.
LEFT DRAWER RELEASE
LEVIER DE TIROIR GAUCHE
To maintain the smooth and quiet operation of the ball-bearing slides,
lubricate the extension track that houses the ball bearings every 3-6
months with a high quality jelly-like petroleum based lubricant.
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be
cleaned with spray wax. Lightly spray the wax on the surface, and gently
wipe with a soft, dry microfibre cloth.
Window cleaner and a soft cloth dampened with water can be used to
clean the finish on a regular basis.

Customer Satisfaction

All mechanical parts are inspected and adjusted for proper use before
shipment; however, mechanisms such as drawer slides and locks may
shift during transit. Should any of these items not operate correctly,
please call customer assistance at 1-800-674-6625.
PRODUCT MADE IN CHINA
PRODUIT FABRIQUÉ EN CHINE
PRODUCTO FABRICADO EN CHINA
LEFT DRAWER RELEASE
LEVIER DE TIROIR GAUCHE
- 5 -
RIGHT DRAWER RELEASE
LEVIER DE TIROIR DROIT
RIGHT DRAWER RELEASE
LEVIER DE TIROIR DROIT