Description Of Symbols - Matrix X-One 20V Manuel D'utilisation

in and loosening screws.
UK
• Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
• Keep your workplace clean. Blends of
materials are particularly dangerous. Dust from
light alloys can burn or explode.
• Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
• Do not open the battery. Danger of
shortcircuiting. Protect the battery against heat, e.
g., also against continuous sun irradiation
and fire. There is danger of explosion.
• In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
• When the battery is defective, liquid can
escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure
than by hand.

5. Description of symbols

Pay attention to all the signs and symbols shown in
these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
Battery Li-lon
Li-lon
Avoid continuous sunlight
Max 45ºC
Keep away from fire
Do not throw it into water
Battery pack is part of the recyclable
resources
16