Audio Setup - M-Audio UBER MIC Guide D'utilisation

Audio Setup

To set Uber Mic as your default recording and playback device, follow the directions below based on your
computer's operating system.
Windows:
1. Use the included USB cable to connect the Uber Mic to your computer.
2. In the Taskbar, locate the Volume Control "speaker" icon. Right-click it and select Playback Devices.
Alternatively, go to Start Menu > Control Panel (or Settings > Control Panel in Classic View) > Hardware and
Sound > Sound.
3. In the Windows Sound control panel, select the Playback tab and select M-Audio Uber Mic as the default
device.
4. Click the Recording tab and select M-Audio Uber Mic as the default device.
5. Click Properties in the lower-right corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 48000 Hz (DVD Quality) as the default
format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
macOS:
1. Use the included USB cable to connect the Uber Mic to your computer.
2. Go to Applications > Utilities > Audio MIDI Setup.
3. In the Audio Devices window, select M-Audio Uber Mic in the left column.
4. Right-click or press Ctrl and click M-Audio Uber Mic, and select Use this device for sound input.
5. Right-click or press Ctrl and click M-Audio Uber Mic, and select Use this device for sound output (to monitor the
mic/computer signals through Uber Mic's headphone output).
6. Quit Audio MIDI Setup.
Setting Up Uber Mic with Your Software
Note for Windows users: To use your Uber Mic with Pro Tools | First M-Audio Edition, download the Uber Mic
Windows driver from m-audio.com.
Be sure your audio software program is set up to receive audio from the Uber Mic. This can usually be done in your
software's Preferences, Device Setup, or Options. Please consult your software manual for more information.
To set up Uber Mic with Pro Tools | First M-Audio Edition:
1. Use the included USB cable to connect the Uber Mic to your computer.
2. Open Pro Tools | First M-Audio Edition.
3. Go to Setup > Playback Engine....
4. Open the Playback Engine dropdown menu and select M-Audio Uber Mic.
Note: You may need to save and restart your project.
5. Select your Sample Rate and then click OK to close the Setup window.
You can now add audio tracks to receive audio from Uber Mic and stream recorded audio back through the Uber
Mic Headphone Output.
6