H.Koenig MX16 Manuel D'utilisation page 3

case of need.
· Switch off and do not mishandle the appliance if it should breakdown and/or work badly. Contact
a authorized Service Centre for eventual repairs, asking for original spares.
· Put the appliance out of service at the end or its service life by cutting off the lead after
unplugging from the outlet. Abide by local existing rules and regulations for its disposal.
·Our company may not be held liable for eventual damages to persons, animals or objects
caused by incorrect installation or deriving from improper, erroneous or unreasonable use.
·Observe maximum of 1 min for continues operation of the appliance, then rest 8 min before
restart. Thus after five period, the appliance should be keep rest for30 min.
USING IT THE FIRST TIME
-Read this handbook to familiarize yourself with all the parts of your new food processor.
-Clean all the parts and accessories in contact with food before using the appliance for the first
time (see paragraph "Cleaning").
Warning!
1.Always take care when you are handling the blades to fit them on, taking them out of the bowl
(B1) after preparing the food and when cleaning them, as they are very sharp.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
3. We suggest wearing ear protection while operating the appliance.
HOW TO USE IT
Your new food processor will help you to prepare a lot of basic mixtures that you can use for
your recipes.
Please abide by the following instructions to achieve the best results and to keep your
appliance in good working condition.
Attention!
Never exceed the maximum quantities below and never pour liquids hotter than 75℃ into the bowl
and/or blender
Follow the instructions given below every time you use it:
-Never leave the appliance unattended while it is on.
-Never make the appliance work while it is empty.
-Never touch the moving parts.
-Never put your fingers or utensils inside the lid opening.
-Never press down the ingredients into the lid opening with your hands.
-Do not use the appliance to work hard ingredients (e.g. frozen meat, crusts of cheese...),
rubbery (e.g. candied peel...), and uneatable parts of ingredients (e.g. bones,
crush ice.
-Do not remove the lid and never replace accessories without switching off the appliance and if
the accessory being used has not stopped working.
-Do not remove the ingredients from the bowl before removing the blade
A: Mixing Bowl
. Chopping Function
I
-put the plastic bowl on power unit and turn the handle in clock-wise direction, as
shown in Diagram 1.2.
- Put the blade support on the axis in the middle of the bowl, and press it to the bottom. Then fix
the chopping blade to the blade support, as shown in Diagram 3&4.
Warning: The blade in sharp. Please only hold the plastic part while using.
- Put the food (e.g. Meet) into the bowl, as shown in Diagram 5. Big piece food needs to be cut
into small pieces. (Approx 2 cm × 2 cm × 2 cm).
- Put the cover on the bowl, and turn it until hearing the chattering sound, as shown in Diagram 6
&7.
- Fix the plug to the electric socket, press the button switch to choose the speed, as shown in
Diagram 8. (1-3The power increases by degree; PULSE is touch switch, used for intermittent
operation)
- When the chopping is finished, press the button switch to "0". After the blade stops, pour out the
food.
fishbone...) or