Pouring Wine - Coravin SmartClamps Manuel D'utilisation

POURING
WINE
Be sure SmartClamps™ are in down
position before use.
Align SmartClamps™ over neck of
1
bottle and push down fi rmly on Handle
in one fl uid motion, until Needle is fully
inserted into cork and no longer visible.
SmartClamps™ are designed to fi t
snuggly around bottle neck.
Hold bottle with one hand and Handle
2
with the other. Tilt bottle until Spout is
over glass and bottom of bottle is raised
higher than Spout.
DO NOT hold System by Capsule Cup
while pouring.
To pour wine, quickly PRESS AND
3
RELEASE Trigger. Wine will pour when
Trigger is released. Repeat until desired
amount of wine is poured.
2A
1
2B
5
2
3
7
To stop wine from pouring, tip bottle
4
upright while keeping Spout over glass.
Any remaining gas in bottle will be
released and a hissing sound may be
heard.
To remove System, hold bottle with one
5
hand. With other hand, hold Handle and
fi rmly pull System straight up and off in
one fl uid motion.
Rinse System before storing (see
6
instructions on Cleaning the System).
Store bottle on its side in temperature
7
controlled area suitable for wine.
TIPS
Quickly PRESS AND RELEASE Trigger to purge
Needle of residual wine before pouring another
wine.
Be sure to tighten Needle by Needle Grip
before each use.
Remove System from bottle immediately after
pouring to prevent oxidation. A few drops of
residual wine may be seen on top of cork. This
is normal.
5
5
For how-to videos, visit
8
Coravin.com/start