Mounting The Ceiling Bracket; Mounting The Back-Pressure Flap - Bosch HIB82651UC Instructions D'installation

Mounting the ceiling bracket

Drill holes according to the drill template.
1.
Fasten the ceiling bracket to the ceiling.
2.
Fasten the 4 lower vertical brackets to the extractor
3.
hood with 16 screws.
Fasten the lower horizontal bracket with 8 screws.
4.
Fasten the 4 upper vertical brackets with 16 screws,
5.
while maintaining the noted distance to the cooktop,
see Chapter Calculating the installation height.
Mounting the extractor hood on the ceiling
WARNING
9
RISK OF INJURY
The appliance is heavy. To move the appliance, 2
people are required. Use only suitable tools and
equipment.
Lift the extractor hood with the vertical brackets into
1.
the ceiling bracket until it snaps in audibly.
Secure the extractor hood with 16 screws.
2.

Mounting the back-pressure flap

Using 4 screws (4x8 mm), attach the back-pressure flap
to the extractor hood.
11