Cleaning And Maintenance - Domo DO7291S Mode D'emploi

ACCESSORIES
1. Crevice nozzle: for hard to reach areas like radiators, crevices, corners, in
between pillows,...
2. Dust brush: for furniture, shelves,...
3. Parquet brush: for vacuuming parquet
USE
1. Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2. To turn the vacuum cleaner on and off, press the foot pedal with the
3. To adjust the suction power, turn the suction power regulator to the left or or right between the
MIN and MAX indicators. For delicate materials it is best to use the minimum power level, a medium
power is recommended for matresses, furniture and carpets and the maximum power level should
be used for tiles, wood and other hard floors.
· When you want to clean hard floors, make sure that the brushes in the floor nozzle are down
· When you want to clean carpet, make sure that the brushes in the floor nozzle are retracted
(B).
Slide the valve on the hose into the closed or open position to increase or reduce the suction power.
Slide the switch on the floor nozzle to 'deep clean' to effectively remove deeply-ingrained dust from
all types of floor.
4. When you have finished vacuuming, unplug the vacuum cleaner and automatically rewind the cord
by pressing the foot pedal with the
forth while rewinding the cord, by guiding the cord with your hand. This to prevent possible damage.

CLEANING AND MAINTENANCE

CHANGING THE DUST BAG
The vacuum cleaner cannot be used without the dust bag. When the dust bag is full or damaged you need
to replace it immediately. The dust bag full indicator turns red when you need to replace it.
1. Remove the flexible hose.
2. Open the top of the dust bag reservoir via the cover.
3. Remove the dust bag and place a new one in the correct position.
Note: you can clean the dust bag by washing it in water. You can then reuse the dust bag. Dry the bag well
before placing it back in the vacuum cleaner.
24
DO7291S
(A).
3
2
symbol. Make sure that the plug does not whip back and
4
1
symbol.
A
B
3
2