Macally MCUPXLQI Guide D'utilisation page 3

How to use the MCUPXLQI
1. Attach the holder to the neck.
2. Place the base into your car's cup holder and
twist the screw knob until you reach a snug fit.
Please be careful not to over tighten the screw
knob.
3. Connect the USB-C end of the charging cable to
the cradle and the other end into the USB-A port of
your car or USB car charger .
4. Press the holder grip and foot support release
buttons on the back of the cradle to expand the
arms and pull down the foot support.
1
2
5. Place your smartphone in the holder and align
the center of your smartphone with the triangle
marks on the grips for best Qi charging efficieny.
6. Push the foot support upward until the bottom of
your smartphone rests on it.
7. Press both holder grips inward until they hold the
smartphone firmly. Your smartphone will
automatically start to charge.
2