Güde 55127 Mode D'emploi Original page 12

Operation with the idle pulley
Pulling force
1. The winch has a pulling force of 900 kg without the
idle pulley (7). As a result, the winch may be practi-
cally used for the following:
a. To put a load with maximum weight of 1,800 kg
from rest to motion on a level surface.
b. To pull a vessel with maximum weight of 2,200
kg.
c. To keep a moving wheeled vehicle with maxi-
mum weight of 2,700 kg.
Using the hand crank
Warning instruction: Do not use the crank to support
the winch that is being operated. There is a risk of in-
jury and the winch may get damaged.
1. Screw the hand crank (1) on the winch.
2.
Turn the hand crank (1) clockwise to make the cable
tight. Then turn until the cable (14) is drawn in to the
full extent. (Crank (1) to be only worked with at rela-
tively low weight.)
THE HAND CRANK (1) MUST NECESSARILY BE
REMOVED AGAIN BEFORE USING THE WINCH!
Servicing
The appliance must always be unplugged before any
servicing/cleaning or other works. Let the appliance cool
down before the given work and transport.
1. Apply fine oil on the cable (9) from time to time.
2. Lubricate the transmission every 6 months. In doing
so, remove the left and right body. High-quality water-
tight grease may only be used for lubrication.
The steel cable (9) must be checked for any damage
every time the appliance is to be used.
The lifting hook (6) and the idle pulley (7) must regu-
larly be checked for any damage.
Residual risks and protective measures
Mechanical residual risks
Risk Description
Getting Loose clothing
caught, and jewels may
wound get caught by
rotating parts.
Broken cable Cable may get
pulled apart
and cause seri-
ous injuries as
a result.
Cutting inju- Frayed cable
ries may result in
injuries.
Neglecting the ergonomic principles
Risk Description
Negligent Operating the
use of per- appliance with-
sonal protec- out appropriate
tive equip- protective
ment equipment may
result in serious
external and
internal injuries.
Protective measure(s)
At all times, wear closefitting
clothing and no jewels that
could get caught.
Do not exceed the pulling
force.
Check the cable! Wear pro-
tective gloves!
Protective measure(s)
Wear specified protective
clothing and work cautiously
at all times.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible. Protect the injured person from other injuries and
calm him/her down.
In case of accident, first aid kit must always be avail-
able in the place of your work in accordance with DIN
13164. Material taken out of the first aid kit needs to be
supplemented right away. If help is needed, please
provide the following details:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the "Marking" section.
Transport package disposal
The package protects the appliance against damage dur-
ing transport. Packing materials are usually chosen de-
pending on their environmental friendliness and disposal
method and can therefore be recycled. Returning the
package to material circulation saves raw materials and
reduces waste disposal costs. Parts of packages (e.g.
foils, styropor®) can be dangerous to children. Risk of
suffocation! Keep parts of packages away from children
and dispose them as soon as possible.
Operator requirements
The operator must carefully read the Operating Instructions
before using the appliance.
Qualification
No special qualification is necessary for using the appli-
ance apart from detailed instruction by an expert.
Minimum age
The appliance may only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions.
No special training necessary.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureauc-
racy at our webpage www.guede.com in the Services
part. Please help us be able to assist you. To identify your
appliance when claimed, we need to know its serial No.,
order No, and year of production. All these details can be
found on the type label. Enter the details below for future
reference.
Serial No.
Order No.
Year of production:
Tel. +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
12