VINCENT STU-2 Manuel D'utilisation page 26

13 14
13. 75Ω FM ANTENNA: VHF antenna socket
Connect a coaxial antenna cable here for FM
radio reception. If there is no antenna wall socket
a room antenna or the wire antenna supplied can
be used.
14. LOOP ANTENNA:
Socket for the AM antenna
Connect the loop antenna supplied or an outdoor
antenna here if you require medium wave recep-
tion.
15. LAMP: Dimmer for the tube illumination
The setting of this switch affects the brightness of
the illumination of the tube display window (2).
Vincent
26
REAR VIEW
15 16
16. OUTPUT: Stereo Audio Output
17. FUSE: Fuse holder
18. AC 220-240V: Power Connector
17
Via this high-level output, the tuner is connected to
an amplifier, preamplifier etc..
This small plastic housing holds the fuse. Refer to
the security precautions.
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
18