Velleman CAMSET29 Mode D'emploi page 6

CAMSET29
Step 7 Hold the display with the Answer
key down.
Flip the device by 180 degrees,
Connect the camera cable to the
connector next to the SD card.
Put the battery lid back in place.
Step 8 Flip the device back again.
Straighten the camera cable.
Align the device with the bracket
and gently push it down until the
device is fastened on the bracket.
Make sure the camera is firmly
attached to the door.
Press keys to check if the device
works correctly.
6. Operation
6.1 Start the camera
1. Press the Answer key to activate the device.
The LCD displays the camera view.
2. To record (video or picture), press the Answer key again.
The device automatically saves the picture or video to the Visitor
records (see below).
You can set whether the device records video or pictures in the
settings (see below).
6.2 Visitor records
The visitor Records lists all visits, sorted by time.
To view the visitor records:
1. Press the Answer key to activate the device.
The LCD displays the camera view.
2. Press the Menu/OK key to change the view.
3. Use the arrow keys to select Visitor records and press Menu/OK
key.
V. 01 – 12/02/2013 6 ©Velleman nv