Publicité
Les langues disponibles
Les langues disponibles
instruction manual
oPerAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Hose connection
2. Cable reel-in button
3. Vacuum-cleaner handle
4. On/off switch
5. Rear wheels
6. Dust receptacle
7. Hose
8. Grip with adjustable air opening
9. Dust container lid release button
10. 2-in-1 attachment
11. Telescopic tube
12. Combi nozzle
13. Exhaust filter
oPerAtion
1. Push the hose into the hose connection on the
motor unit (see figure 2A). To remove the hose,
push the two buttons and pull it out of the hose
connection.
2. The power cord has a yellow and red mark (see
figure 2B). Pull out the cord to the yellow mark.
Never pull out the power cord beyond the red
mark. This could damage the power cord.
3. Put the plug in the wall socket, and press the
On/Off switch. To switch off the appliance, press the On/Off switch again.
4. The appliance is now ready for use. You can move the vacuum cleaner while you are cleaning by pulling
on the hose grip. You can lift the appliance with the vacuum cleaner's handle.
5. If so required, you can reduce the suction quickly by moving the slide on the hose grip.
6. Slide the hose handle into the telescopic tube (see figure 3A).
7. Press the button on the telescopic tube and
keep it pressed in; you can then extend or
retract the tube to the required length (see
figure 3B).
8. Press the foot button on the nozzle to set the
combi nozzle for use on hard or soft surfaces,
(see figure 3C). For use on hard surfaces, press
the foot button on the combi nozzle to extend
the brushes. Lift the button for use on soft
surfaces.
8.
11.
12.
10.
6.
A
A
23
7.
1.
3.
9.
2.
4.
5.
13.
B
B
C
Publicité
