Table des Matières
Publicité
Rev.1 16/03/2018
ENG
Pag.50
GENERAL INFORMATION
Supply and safe-keeping
The manual is supplied in printed format.
Keep this manual safe, with the boiler, so that the user can consult it easily.
The manual is an integral part, for safety reasons, therefore:
•
it must be kept intact (in full). If it gets lost or ruined it is necessary to immediately ask for a new copy:
•
it must be kept with the boiler until demolition (including relocation, sale, rental, lease, etc....).
The Manufacturer will not be held liable for improper use of the boiler and/or damage caused by operations that are not set forth in
the technical documentation.
Language
The original manual was written in Italian.
Any translations into additional languages must be carried out based on the original instructions.
The Manufacturer is liable for the information contained in the original instructions; the translations into different languages cannot be
fully verified therefore if any inconsistency arises it will be necessary to follow the text in the original language or contact our Technical
Documentation Office.
Symbols used in the manual
symbol
! IMPORTANT
SAFETY MEASURES
General safety warnings
! IMPORTANT
Boiler installation, system verification, operation verification and initial calibration must be carried out exclu-
sively by qualified and authorised staff.
The boiler must not be used as an incinerator or differently from its purpose.
Do not use any fuel other than fire pellet. It is strictly forbidden to use liquid fuels.
It is prohibited to use the boiler with the door or ash drawer open or the glass broken.
It is forbidden to make unauthorised changes to the boiler.
The boiler needs to be connected to a single chimney that guarantees the draught declared by the Manufacturer
and observes the installation regulations that apply to the installation site.
The room where the boiler is installed must have an air intake.
Before using the boiler it is necessary to know the position and function of the controls.
If the chimney catches fire you must call the fire brigade.
Make sure the electrical system and the sockets are suitable for the maximum absorption of the unit, specified
on the label and in this manual.
Connect the unit to the heating system; under no circumstances can it be used without the hydraulic connection
and without water in the heating chamber and system.
The power plug must be easily accessible.
Only use original spare parts. Any tampering and/or replacements that have not been authorised by Ravelli can
pose a danger to the user's safety.
use and maintenance manual
HR EVO 170 - 250
definition
This symbol is used to identify particularly important information in the manual. This
information also concerns the safety of users involved in using the boiler.
This symbol is used to identify important warnings for the safety of the user and/or the
boiler.
Read this instructions manual carefully before boiler installation and use. Failure to
observe the instructions set forth herein can void the warranty and/or cause damage to
property and/or people.
Publicité
Chapitres
Table des Matières
Dépannage
