Remote Control; Using Method & Functional Status Of Control Panel - H.Koenig SWR28 Manuel D'utilisation

1. Please don't forget to take out the battery before discarding the Cleaner.
2. Please remember to turn off the switch before taking out the battery from
the Cleaner and Space Isolator.
3. Please don't place the battery in the high-temperature environment above
45℃ or in the water.
4. Please don't exert external force to the battery or drop them from high
place.
5. The battery should be recycled with safe disposal. Please don't discard it
freely or throw it into fire for fear of explosion!

Remote control :

Using method & functional status of control panel :
The following steps are very important, or the remote control may fail.
1. You should check code of the remote control or cleaner.
2. Check the remote control and cleaner have enough power, turn off the cleaner, press OK on the remote
control for more than 4s, and then turn on the cleaner without releasing OK.
After the cleaner toots twice, release OK, then the code check set is finished.
3. If you fail to hear toot during the code check, just repeat the above process.
: You can use the remote to a maximum range of 10 meters.
Automatic cleaning key/Thursday
Spot cleaning key/Friday
Time set key/Tuesday
Timing key/Monday
UV sterilizing key/Wednesday
Automatic recharching key/Sunday
Speed selection key/Saturday
Turn off/cancel
It will work automatically after the battery id full
Confirmation key
Forward key
Back key
Turn left key
Turn right key
Keys in total