Dirt Devil Factory M3330 Mode D'emploi page 43

2 Assembly
7
8
9
7. Now powerfully insert the handle into the central con-
sole from the top (Fig. 7) until it will go no further.
NOTE:
The hole in the handle must be visible through the hole of
the central console. Otherwise, it will not be possible to
get the screw all the way through.
8. Screw the safety screw you removed before back on by
hand (Fig. 8).
9. Put the water container back on (Fig. 9).
NOTE:
If you want to start steam cleaning immediately, we rec-
ommend taking this opportunity to fill the water tank with
water before reattaching it,
water tank".
Chapter 3.1, "Filling the
43