Components; Commissioning; Ec Declaration Of Conformity - Schneider Airsystems SGS 315-1 Notice D'utilisation D'origine

GB
SGS 315 - 1"
1.5

Components

01 Plug nipple
02 Trigger lever
03 Air regulation
05 Drive shaft
06 Retaining ring
08 Housing
13 Screws
15 Supply/exhaust air hose
16 Hose clamp with screw
1.6

Commissioning

Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
Handle attachment:
1. Remove the rubber protection (item 12).
2. Attach the handle (item 14) to the hous-
ing (item 08).
3. Check that the handle is seated securely.
4. Attach the rubber protection (item 12).
I/ 4
1.7 EC Declaration of Con-
formity
Impact wrench
SGS 315 - 1"
Year of CE mark: 2008:
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100;DIN EN 792;
BGR 500;
98/37/ EC (before 28.12.2009),
2006/42/ EC (after 29.12.2009).
pp Marco Lodni
Head of Development/Testing
08.2008
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
Serial no.
T400020