THOMSON TT400CD Manuel D'utilisation page 20

SKIP MODE FOR MP3 DISC
1. Press FOLDER UP /DOWN by REMOTE, the Album no. will change.
2. Press SKIP +/SKIP buttons the Track no. will change.
3. When the desired track is being selected, press the "PLAY" button to start playback.
REPEAT
1. When playing CD, press MODE button (11) once to repeat the same track/song.
2. To repeat the whole disc, press the MODE twice and the "REP ALL" display will light up.
3. To cancel repeat play, press the STOP button or press the MODE button repeatedly until the
repeat indicator disappears.
Note: If in "REPEAT ALL" mode, the normal & program playing will also effect in this function.
RANDOM PLAY CD
1. When playing the CD or MP3 disc, press the MODE button three times, the "RANDOM" will
show on display.
2. Press the SKIP +/- button, tracks will play randomly.
3. To cancel random play, press the STOP button once, the random indicator disappears.
PROGRAMMED DISC PLAY (CD)
It is not possible to enter programs during Playing. You must be in STOP mode.
1. Press the PROGRAM button (11) on the unit. The following information will be displayed on
the CD Display.
2. Press the Skip Track buttons (16/17) on the unit to select the track to be stored.
3. Press the PROGRAM button. The first program selection is now stored in the program memory.
Listening to Programmed Tracks
Press the Play Pause button. Disc play will start at the beginning of the first programmed track.
To clear the program memory
If the disc is playing, press the Stop button.
ENCODING AND STORING FROM A NORMAL CD
You can encode you favorite CD songs to mp3 format and store them into your memory device
through the USB port.
1. Set the Function button (21) on the unit to choose the CD mode
2. Press the TUNING/SKIP >> button (16/17) to select the track, and then press the PLAY/PAUSE
button (14) to be encoded.
3. Press the RECORD button(9) to start sync encoding and the display will show "USB-ONE" flashing, If
you want to record one song only, press RECORD button again. It starts record the selected one song.
4. If you want to record all songs. Press the TUNING/SKIP >> button (16/17), it prompt to "USB-ALL.
Then press the RECORD button to confirm, it will record ALL song in one file.
5. Press the STOP button (15) to stop encoding.
6. Remarks: Recording CD must be synchronized.
WARNING: Some originals CD's may unable record as they are protected against copying.
COPYING FROM MP3 DISC
You can copy your favorite CD/MP3CD file into USB drive.
1. Set the Function button (21) on the unit to choose the CD mode
2. Press the TUNING/SKIP >> button (16, 17) to select the track, then press the PLAY/PAUSE button
(14) to be copied.
3. Press the RECORD button(9) to start sync copy and the display will show "USB-ONE" flashing, If
you want to record one song only, press RECORD button again. It starts record the selected one
song.
8