Denon Professional DN-700AVP Guide D'utilisation page 3

Les langues disponibles

Features

Front Panel

1. Source Select Knob: Turn this knob to select the input source. Select from Bluetooth, TV, Tuner, DVD,

Dock, BD, SAT/CBL, Game1, Game2, CD, and Multimedia (select from music streaming services, Internet

radio, saved favorite files on a network, media server, or a connected USB flash drive).

2. ON/Standby: Press this button to turn the unit on/off. When the unit is off, it will be in a standby mode.

3. Phone Output: Connect your headphones to this 1/4" (6.35 mm) headphone output.

4. VFD Display: The display is used to show information about the selected audio source, the FM radio station,

Internet radio, setup menus, and various functions.

5. IR Sensor: Aim the remote control here to adjust the unit's settings.

6. Master Volume: Use this knob to control the master volume of the unit.

7. Zone On/Off: Use this switch to turn zone two on or off.

8. Zone Select: Use this button to select which source input is mapped to Zone 2.

9. Sleep: Use this switch to set the sleep timer in increments of 10 minutes up to 120 minutes.

10. Status: Use this switch to display information about the audio source, HDMI connection, and Unlock status.

11. Tuner -/+: Use these buttons to select the FM radio channel.

12. Dimmer: Use the switch to control the brightness of the VFD display.

13. Media: Use this to switch to a connected USB flash drive, Internet Radio, or media server.

14. Bluetooth: Press this button to pair the unit with a Bluetooth device. Press and hold this button for 3 seconds

to disconnect from a paired Bluetooth device.

15. Quick Selects: Use these switches to select preset audio, video, or HDMI input sources.

16. Key Lock: Press and hold this button for 3 seconds to lock all other switches on the front panel. A message

will be shown on the display indicating that all keys are locked.

17. HDMI IN: Connect a HDMI device to this front panel HDMI input.

18. USB Port: Connect a USB flash drive here with music and picture files. WMA (Windows Media Audio), MP3

(MPEG-1 Audio Layer-3), WAV, MPEG-4 AAC, and FLAC (Free Lossless Audio Codec) are supported.

12 13