Tristar BR-1013 Mode D'emploi page 4

Instruction manual
• To protect yourself against an electric shock, do not immerse the cord,
plug or appliance in the water or any other liquid.
• Do not use this appliance with a damaged cord or plug or when the
appliance has malfunctions, or has been damaged in any manner. To avoid
a hazard make sure that a damaged cord or plug will be replaced by an
Competent qualified repair service(*). Do not repair this appliance yourself.
• Unplug the appliance from the socket when you are not using it.
• Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
• Allow the device to cool down before you are going to remove or
replace spare parts.
• Do not use this appliance near direct heat sources.
• Make sure the cord does not touch the hot parts of the appliance.
• We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
• Do not use this appliance in the bathroom or near a sink filled with water.
If this appliance has fallen into the water do not under no circumstances
directly grab this appliance, but first pull the plug from the socket.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
• Children should be supervised to ensure that they do not play with the
appliance.
• Caution! Bread can burn.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4
PartS deScriPtion
1. Bun warmer
2. Carriage handle
3. Cancel button
4. Color controller
5. Crumb tray
Before the firSt uSe
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
• By using the appliance for the first time, the raclette-grill may smell and
emit some smoke. This is normal, the grease that may have adhered to
the element during manufacture is burning off.
1
2
3
4
5