Installing in Japanese-made Cars
Installation on Toyota Car using Brackets at Holes shown by "●"
When using the bracket shown above, you cannot use screws at two holes of
the right and left unit sides.
1. Mount the bracket at each side.
Accessory 5 (M5x6mm)
Screws (included in
audio unit package)
2. Bend each end of case to fix the bracket.
10
|
KVT-696/KVT-636DVD/KVT-516/KVT-546DVD
or
Car Bracket
Use a flat-blade screwdriver or pliers, and bend
each case tab into the hole of installation
bracket to fix the bracket.
Accessory 5 (M5x6mm)
Screws (included in
audio unit package)