Publicité
Les langues disponibles
Les langues disponibles
cancelled when switch the compressor manually each time. The programmed
time remains unchanged if the machine stops to wok due to water full or during
defrosting.
Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on, the
operation will stop automatically, and the buzzer will beep 15 times to alert the
user, that the water needs to be emptied from the drainage tank.
Emptying the drainage tank
1. Lightly press on the sides of the tank with both hands and pull out gently.
(see Fig. 1)
2. Discard the collected water. (Fig. 2)
3. Once it is empty, replace the tank in the appliance. When replacing the
drainage tank, press the tank firmly into place with both hands. If the tank is
not positioned properly, the Water-full sensor will be activated, and the
dehumidifier will not operate. (Fig. 3)
NOTE
1. Do not remove the float from the water tank. The
water full sensor will no longer be able to detect
the water level correctly without the float and
water may leak from the water tank.
2. If the drainage tank is dirty, wash it with cold or
lukewarm water. Do not use detergent, scouring
pads, chemically treated dust cloths, gasoline,
benzene, thinner, or other solvents, as these can
scratch and damage the tank and cause water
leakage
Instructions for use
Fig. 1
Fig. 2
Fig. 3
English
7
Publicité
