Publicité
Les langues disponibles
Les langues disponibles
English
Humidity Level & Timer 2 digits display
The indicator features 3 functions:
1. when you set the humidity, it will indicate the humidity that you have
selected.
2. when you program the time for the unit to turn on and off, it will show the
hours.
3. When the environment humidity is lower than 35%, it will show "
4. When the environment humidity is higher than 95%, it will show "
Notes:
- Water tank must be correctly installed for the dehumidifier to operate.
- Do not remove the tank while unit is in operation.
- If you want to use drain hose to drain water away, please install the hose
according to section "continuous external draining".
Operating instructions
1. Press
button once to start operation. Press it again to stop operation.
2. Press
button to set the desired fan speed. It can be adjusted between
high speed and low speed.
3. Press
button to set the desired humidity level in the room, which can
be selected from 40% to 80% at 5% intervals.
After a period of working, when environment humidity is lower than the
selected humidity by 2%, compressor will stop, and fan stops working 3 minutes
later. When environment humidity is equal to or higher than the selected
humidity by 2%, compressor will restart once 3-minute compressor protection
time over.
4. Press
button can be timer setting:
Press the button to program the time when the unit turns on and turns off. If you
want to cancel the timer programming, adjust the timer at 00. Pressing the
button, the time circulate from 0 0 - 0 1 - 0 2 ... ... 2 3 - 2 4 . The selected hour is the
programmed time to switch the machine. The programmed time will be
6
35
"
95
"
Instructions for use
Publicité
