Télécharger Imprimer la page

HAEGER Humidifree 10 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

English
3. When replacing the drainage tank, press the tank firmly into place with both
hands. If the tank is not positioned properly, the "TANK FULL" sensor will be
activated, and the dehumidifier will not operate.
Continuous water drainage
If the appliance is to be operated for long periods but you are unable to empty
the tank regularly, you are recommended to use the continuous drain facility.
1.
Plug a plastic pipe (with an inner diameter of 10mm) to draining hole.
2.
Draining tube should place lower than the draining hole to let water flow
out.
Note: Water pipe cannot be too long (usually 0.6m or 1m), the height cannot
surpass the height of drainage mouth, or there will be water leakage.
Cleaning and Maintenance
Always unplug the appliance from the power socket before performing any
cleaning or maintenance operations.
For safety reasons, never wash the dehumidifier using a jet of water.
Cleaning the cabinet
- Clean the appliance using a damp cloth then dry with a dry cloth.
- Do not use petrol, alcohol or solvents to clean the appliance.
-
Do not spray liquid insecticide or similar products as they may deform the
plastic.
8
Instructions for use

Publicité

loading

Ce manuel est également adapté pour:

De-010.010a