Wagan Tech 15A Intelligent Guide D'utilisation page 8

15A Intelligent Battery Charger by Wagan Tech
3. Connect the red positive (+) charger clip to the positive (+) battery post.
4. Place the free end of the battery cable as far away from the battery to
be charged as the cables permit and then connect the black negative (-)
charger clip to the free end of the cable. NEVER face the battery when
making the connection.
5. Plug the AC power cord/plug into a properly grounded outlet.
6. When disconnecting the charger, always use the reverse order from the
connection process, staying as far away as possible from the battery.
OPERATING INSTRUCTIONS
1. Follow directions on page 5 to connect Charger to battery, then plug the
Power Cord into a properly grounded outlet. If the cable clamps are not
connected or the connection is loose, the LCD screen will display as shown
in Figure A.
2. When a good connection has been made, the LCD screen will display the
battery capacity and voltage. See example in Figure B.
7
Figure A
Figure B
www.wagan.com
®